Hot DIP Galvanizing Plant Fully Enclosed Pickling Room

Product Description

Pre-treatment enclosure room for hot dip galvanizing plant


Pre-treatment enclosure room

• The pre-treatment enclosure is made by H-section steel, and welded with polyethylene sheet,  that make the whole pre-treatment enclosure in good quality condition, eg. good strength, good sealing property;
• Good anti-aging property, life time is up to 5-10 years;
• Install PP slot in the foundation, easy to observe acid leakage.

Acid mist treatment and full enclosure of pre-treatment room
1. All tanks in the pre-treatment are placed and installed in the pits which are above the ground. Full enclosure is essential steel building, which prevent acid mist leakage outside, no any corrosive for other equipments outside.
2. The full enclosure building is made of exterior steel structure and internal PVC crust corrosion resistant plate.  The special material (eg. glass cement) are used among the panels to keep the good sealing property.  Acid resistant wood board are installed at the 2m height position of lfull enclosure lower part, mount the window with glass to monitor, Ensure the pre-treatment processing in the micro negative pressure condition and prevent acid mist leakage outside. Two pcs maintenace gallery are installed on the top side of pre-treatment room.
3. The monorial hoists which are used for galvanizing line are placed on the topside of sealed roof of pre-treatment room.   Monorial hoists with special device can move and return direction through breaking rubber gap among the silicon sealing belts, it can prevent and alleviate the corrosion and readuce maintenance and examination of workload, so the maintenance cost will be save too much.
4. The operators working environment is always in safe and clean condition.

Advantage
1. The lowest rated motor power under the same capacity conditions, completely collection efficiency.
2. The damage probability of PP transport pipes is very small, because no pipes that can be damged.
3. Safe, no acid vapour
4. The recoverable cost for all equipments in working area is very low
5. The equipment overflows very little, even though no working during night and holidays, it can avoid the acid vapors overflow channel and corrode the equipment.

Performance characteristics:
1. Operating temperature is 10 ~100°C.
2. Strong corrosion resistance, convenient operation, long service life;
3. Light weight, easy to transport and install;
4. Simple and convenient to maintain.
5. Applicable Media: almost all of the inorganic medium and most organic solvents.


For any detail information pls feel free to contact us, thanks.