Wastewater Treatment Equipment

• Type: Coating Production Line
• Coating: Galvanized
• Substrate: Steel
• Certification: CE, ISO
• Condition: New
• Transport Package: Container
• Model NO.: HDG-WWT-5002
• Specification: customized
• Trademark: Annuo
• Origin: Hebei, China
• HS Code: 85433000
• Production Capacity: 200sets/Year

Product Description

                         Wastewater treatment equipment
Material:Engineering construction+ Basic antiseptic+Pumps+Pipes
Operation Method:Automatic operation
Matched Machinary:Filter press machine and multi-pump sets etc.
Usage:
The wastewater is directly pumped from the rinsing tank to the neutralization tank, and agitated and oxidized by aeration. The aeration oxidation tank and the aeration oxidation tank are designed according to the different neutralizing materials used, and different oxidation ratios are designed. After the oxidation is completed, the water is drained into the sludge tank for pressure filtration, and the drainage after the pressure filtration is put into the middle tank for use, and the middle water tank is directly drained and rinsed. The tank is reused. Since the neutralized agent added is a crystal of ammonia hydrogencarbonate, there will be no water or other liquid level. In general, there will be no problem of increased accumulation of recycled water. If there is an increase, the increment can be used as The plating bath is supplemented with water to achieve water balance. The insufficient rinse water can be supplemented with light hydrochloric acid or tap water.
Feature:

1. The process route determined by this program has the characteristics of advanced technology, high reliability, good impact resistance, and low labor intensity during operation and operation.
2. According to local government environment requirements for wastewater treatment, the process focuses on the waste acid and ferrous in the water.
3. Chemical wastewater treatment requires high operation difficulty and fast response. Therefore, all the operation positions are automatically processed in the process.It is cost savings and reduce operational errors. 

 

Automatic operation mode: the mode adopted during normal operation, the main work process does not require operator intervention, the fault happened will automatically stop, and the operation is automatic.